Monday, June 6, 2016

Stock extracted boot and System Image after Marshmallow update

Hello all,

I'm happy to give you the stock image of the MM update received for my phone.
Is the version 2.10.401.1 made from the last update 2.10.401.1-1.21.401.1_release_476671 (Android M - Step 2).
After a lot of work I was able to make the update to MM.

Here is the link were I put my back-up.

http://ift.tt/1YaHa80


On the link you gonna find the back-up I've made with TWRP vers 3.0.2.0 WITHOUT mounting the system image as read/write so it is having the same sha1 that the step 2 OTA request (sha1= 6c704c9eb45552123769d1adc250d604ce2423f7 ) after update so I think is correct to say is stock.

You also can check if after upload/download/unpack the system image does have same sha1 then is safe to use, Also there is the md5 file, if you can't get sha1.
Is one md5 also for the complete zip file in case it upload/download goes wrong.

The files posted are in the twrp format copied from the back-up I did take. So in order to use, you have to copy them inside a folder were the twrp is doing your back-up. They are image files.
Not sure if they will work without flashing the firmware that comes together with the Step2 update.
They can also be renamed as system.img and boot.img and flashed with recovery as image.

Are for CID HTC__001, HTC__102, HTC__002, HTC__M27, HTC__A07, HTC__031, HTC__031, HTC__Y13

For the other CID I don't know if they can work. If they can be booted up without the firmware flashed then they will work, if not then not.

Fell free to use and to make available cm13 (I'm thinking to you @voidzero). ;)
If somebody else want/know to port some roms from other htc phones with MM (m10, m9, m8) fell free to use and ask there developer of that rom if we are allowed to use.

The file 0pkvimg.zip is the last firmware sent by HTC in the last update. This is optional, and it will make the phone stock in MM if you flash first with twrp recovery the system image. It work only with the above mentioned CID.
Take care before you flash that you have to be locked and you will loose the twrp recovery, it will install his last stock recovery.

(side note: the new recovery that comes it has just a triangle in the middle of the screen! If you want to see his functions you have to hold "power" button and press "volume-up" after and then you can see his functions.)

Later I'm gonna try to make them as flash-able file via twrp is someone confirm they work without the last firmware flashed.

Cheers all.


from xda-developers http://ift.tt/1YaH0gR
via IFTTT

No comments:

Post a Comment