Disclaimer: I am not responsible for your broken phone , broken memory card, etc. I have not this device and make this kernel randomly
Should be work on 12.16.5.118 firmware, may be and lower
Bootloader should be unlocked otherwise your device can't start with custom kernel!!!
Kernel Features:
1. Added NTFS OTG support in read only mode
2. Add extra governors Powersave, Conservative, ConservativeX, BioShock, Wheatley, Lagfree, Adaptive, Lionheart, Hotplug
3. Add extra I/O schedulers Deadline, Zen, Fiops, VR, BFQ
4. In default governor Interactive set touchboost_freq to 800 MHz
5. Added KVM support
6. Added CIFS support
7. Init.d support. for working you should install BusyBox to xbin folder, then create system/etc/init.d folder with 777 permissions.
8. Build with GCC 4.9
1. Download ADB& Fastboot drivers for PC http://ift.tt/1wyxwAY and extract it in any folder
2. Put new_boot500cl.img in folder with ADB& Fastboot drivers
3. You should reboot your phone in the droidboot mode. (turn off you gadget then press Turn off button and volume + button)
Then go to the ADB& Fastboot folder and hold Shift + Right Mouse button and write this command:
4. Reboot to Android
If your device can't start you forgot unlock bootloader or I make not working kernel
Don't panic! Take stock boot.img from stock firmware and flash it using previous instruction- and device will be start
Kernel image here: http://ift.tt/1ZondZM
My kernel source here: http://ift.tt/1X5b5yX
XDA:DevDB Information
Custom kernel for stock ZE500CL, Kernel for the Asus ZenFone 2
Contributors
BORETS24
Kernel Special Features:
Version Information
Status: Testing
Beta Release Date: 2016-06-05
Created 2016-06-05
Last Updated 2016-06-05
Should be work on 12.16.5.118 firmware, may be and lower
Bootloader should be unlocked otherwise your device can't start with custom kernel!!!
Kernel Features:
1. Added NTFS OTG support in read only mode
2. Add extra governors Powersave, Conservative, ConservativeX, BioShock, Wheatley, Lagfree, Adaptive, Lionheart, Hotplug
3. Add extra I/O schedulers Deadline, Zen, Fiops, VR, BFQ
4. In default governor Interactive set touchboost_freq to 800 MHz
5. Added KVM support
6. Added CIFS support
7. Init.d support. for working you should install BusyBox to xbin folder, then create system/etc/init.d folder with 777 permissions.
8. Build with GCC 4.9
How to install:
1. Download ADB& Fastboot drivers for PC http://ift.tt/1wyxwAY and extract it in any folder
2. Put new_boot500cl.img in folder with ADB& Fastboot drivers
3. You should reboot your phone in the droidboot mode. (turn off you gadget then press Turn off button and volume + button)
Then go to the ADB& Fastboot folder and hold Shift + Right Mouse button and write this command:
Code:
fastboot flash boot new_boot500cl.img If your device can't start you forgot unlock bootloader or I make not working kernel
Don't panic! Take stock boot.img from stock firmware and flash it using previous instruction- and device will be start
Kernel image here: http://ift.tt/1ZondZM
My kernel source here: http://ift.tt/1X5b5yX
XDA:DevDB Information
Custom kernel for stock ZE500CL, Kernel for the Asus ZenFone 2
Contributors
BORETS24
Kernel Special Features:
Version Information
Status: Testing
Beta Release Date: 2016-06-05
Created 2016-06-05
Last Updated 2016-06-05
from xda-developers http://ift.tt/1X5awoR
via IFTTT
No comments:
Post a Comment